Smart meters send electricity and gas readings to the energy supplier automatically, removing the need for manual readings and estimated bills.
This guide covers what business smart meters are, how they work, the different types and what each looks like, their benefits and limitations, and how a business can get one.
What is a business smart meter?
A business smart meter is a digital gas or electricity meter that records how much energy is used at a commercial property and sends the readings automatically to its supplier.
It records consumption every 30 minutes, giving the business and its supplier a detailed view of when energy is used.
As readings are sent automatically, it avoids the need for estimated bills and allows the business to track its consumption more closely through the supplier’s online account.
Smart meters built to SMETS, the government’s Smart Metering Equipment Technical Specifications, are available for smaller business premises, those with MPAN profile classes 03 and 04, and gas consumption below 732 MWh a year.
Larger sites use advanced meters instead, which work in a similar way, but are designed for higher levels of consumption. For electricity, these are usually half-hourly meters.
How do business smart meters work?
A business smart meter measures energy use and sends the readings digitally to the business energy supplier. The following steps give a more detailed view of this process:
- Consumption is recorded: The meter measures the gas or electricity used, typically at half-hourly intervals.
- Readings are sent through a communications hub: A communications hub, built into or attached to the meter, collects the readings.
- Data is transmitted over the national network: The hub sends the readings over a secure national network run by the Data Communications Company (DCC), using radio or mobile signal depending on the region. All suppliers use the same network, so readings reach the supplier without anyone visiting the site.
- Readings are used for billing: The supplier uses the actual readings to produce accurate bills, rather than estimating usage between manual readings.
- The business can view its usage: Consumption data is usually available through the supplier’s online account or app, and in some cases on a separate display unit, helping the business track when and how energy is used.
How often readings are sent, such as daily, monthly or half-hourly, depends on how the meter is configured by the supplier.
Under the Market-wide Half-hourly Settlement reform, all smart meters will be configured to take readings every 30 minutes.
What is smart mode?
Smart mode is when the meter is working normally, sending readings automatically via the communications hub.
If it loses that connection, it switches to traditional or “dumb” mode. It still records energy use, but readings need to be submitted manually until the connection is restored.
Meters typically lose smart mode because of poor signal, a problem with the network, or a meter fault.
Does a business need a smart meter?
Not by law. Businesses can continue using traditional meters if they prefer, but from 1 September 2027, smaller businesses will need a smart meter to agree to a new fixed energy contract.
Businesses that keep a traditional meter will be limited to contracts that are not fixed-term, which are usually more expensive, and will miss out on time-of-use tariffs.
Even where it is not required, a smart meter removes the need to submit readings, and means bills are based on actual usage rather than estimates.
Are smart meters free for businesses?
Yes, SMETS smart meters are usually installed at no upfront cost. Suppliers recover the cost of installation through the business electricity prices and business gas prices they charge all their customers, in the same way the cost of traditional meters is covered.
The business may only be asked to pay if extra work is needed before the meter can be fitted. This can happen if the existing meter is in an unsafe or hard-to-reach position, there is no room for the communications hub, or the wiring needs upgrading first.
Types of smart meters for businesses
Business smart meters can be categorised in various ways, and a smart meter can fit into several of these categories at once.
By supply type: Electricity and gas
Smart meters are available for both electricity and gas supplies, and are often installed together.
Electricity smart meters
These are powered by the mains supply, and measure how much electricity the site uses. They usually house the communications hub, which sends readings from both the electricity and gas meters to the supplier.
Gas smart meters
Gas smart meters are normally battery-powered, so they do not need a mains connection nearby. They measure the volume of gas used, and send their readings wirelessly to the electricity meter’s communications hub, rather than directly to the supplier.
By specification: Smart and advanced meters
Only meters built to the SMETS standard are technically smart meters, but there are other meters that send readings automatically, typically at larger sites, which are classed as advanced meters.
SMETS smart meters
SMETS, the Smart Metering Equipment Technical Specifications, is the standard that smart meters for smaller sites must meet. They apply to both smart electricity and gas meters.
There are two generations:
- SMETS1: The first generation, which used each supplier’s own communications system, which means they can lose smart mode after the customer switches business energy suppliers. Most have since been upgraded remotely to connect to the national smart meter network.
- SMETS2: The current standard, used for new installations since 2018. SMETS2 meters connect to a secure national network shared by all suppliers, so they keep working in smart mode whichever supplier the business uses.
Both now send readings through a communications hub, using either radio or mobile signal depending on the region. Older hubs are being replaced as mobile networks upgrade, to keep meters connected.
Half-hourly electricity meters
Larger electricity sites use half-hourly meters, a type of advanced meter that records usage every 30 minutes, with the site’s charges based on this actual data.
They can be identified by an MPAN profile class of 00, and send readings over their own mobile connection, using a method known as automatic meter reading (AMR), rather than the national smart meter network.
Advanced gas meters
Larger gas sites, those using more than 732 MWh a year, use advanced gas meters, which also send readings over their own connection using AMR, usually hourly or daily.
Some are also fitted with a volume converter, which corrects readings for the gas’s temperature and pressure, for more accurate billing.
What does a business smart meter look like?
Business smart meters have a digital display, a few buttons, and a small box attached to them, known as the communications hub.
Below is how to tell them apart from other meters, and how electricity and gas smart meters differ.
Appearance of smart meters compared to other meters
A few features help tell a smart meter apart from other meters:
- Traditional meters: Have rotating dials or a spinning disc, or in some cases a digital display, but no communications hub attached.
- Sub-meters: Are usually smaller, and often fitted inside or next to the distribution board, and not at the mains supply connection.
Appearance of smart electricity and gas meters
Electricity and gas smart meters look similar, but have a few visible differences.
Electricity smart meter appearance
Electricity smart meters are rectangular units, mounted on the wall or in a meter cupboard, with a display showing readings in kWh, a small flashing light, and the communications hub attached to the top or side.
Gas smart meter appearance
Gas smart meters are similar in size to traditional gas meters, with pipework connected underneath or to the side, and a display showing readings in cubic metres.
The display is often blank until a button is pressed, and there is typically no communications hub attached.
What are the benefits of smart meters for businesses?
Smart meters bring practical benefits beyond removing the need to submit readings:
- Accurate bills: Commercial electricity and business gas bills are based on actual usage rather than estimates, avoiding unexpected catch-up bills when an actual reading is finally taken.
- A more accurate EAC: Regular automatic readings keep the business’s Estimated Annual Consumption up to date, leading to more accurate quotes and Direct Debits.
- Better visibility of usage: More detailed consumption data shows when and where energy is used, making it easier to spot waste, such as equipment left running overnight, through business energy monitoring.
- Access to time-of-use tariffs: Time-of-use tariffs, which offer cheaper rates during off-peak periods, rely on a smart meter. Shifting some processes to these times can reduce business electricity bills.
- Easier switching: SMETS2 meters keep working with any supplier, so a business can compare business energy and switch suppliers without losing smart functionality.
- Simpler reporting: Accurate consumption data supports Streamlined Energy and Carbon Reporting (SECR), without relying on estimates.
What are the limitations of business smart meters?
Smart meters have a few limitations worth knowing before installing one:
- Connection problems: Meters can lose smart mode in areas with weak signal, which means the business needs to revert to manual readings until the connection is restored.
- Meter or data errors: A smart meter can develop a fault or send incorrect readings, so doing due diligence is still recommended i.e., checking bills against the meter’s display.
- Data privacy concerns: Smart meters share detailed usage data with the supplier. This data is protected under data protection law, and the business can ask its supplier how it is used.
- Installation disruption: Fitting a smart meter requires access to the meter and a short interruption to the supply.
- No reduction in usage on its own: A smart meter shows how much energy is used, but savings only come from acting on that information or switching into a time-of-use tariff and load shifting usage to a cheaper time.
Does a smart meter show which equipment is using electricity?
No, a smart meter only measures the total electricity used by the whole site. It can show when usage rises or falls, which can hint at which equipment is responsible, but it cannot break consumption down by appliance or area.
Sub-metering, which measures individual circuits or equipment, is required to measure usage across these.
How to get a business smart meter
Getting a smart meter is usually straightforward and is arranged through a site’s current business energy supplier.
- Confirm who holds the supply: Only the account holder can request a smart meter. In rented premises where the landlord holds the supply, the request needs to come from the landlord.
- Contact the supplier or broker: Request a smart meter installation, providing the MPAN and/or MPRN for each supply. Businesses agreeing a new fixed-term contract may be offered one as part of the switch. If arranged through a broker, the broker will need a signed Letter of Authority to act on the business’s behalf.
- Book the installation: Agree a date and time with the supplier. Many suppliers can install outside working hours to limit disruption.
- Provide access on the day: The engineer needs access to the meter, and the supply is switched off briefly while the new meter is fitted.
- Confirm the meter is operating in smart mode: After installation, check with the supplier that the meter is sending readings automatically, and set up access to usage data, such as through the supplier’s online account.
Business smart meter FAQs
Our business energy experts answer commonly asked questions regarding smart meters for businesses:
What if a business smart meter stops sending readings?
The business should contact its supplier, which can often reconnect the meter remotely, or arrange an engineer visit if there is a fault or signal problem.
In the meantime, submitting regular manual readings keeps bills based on actual usage rather than estimates.
Can a business have a smart electricity meter but a traditional gas meter?
Yes, a business can have a smart electricity meter alongside a traditional gas meter, for example, if only the electricity meter has been upgraded so far.
The reverse is not usually possible, as a smart gas meter sends its readings through the communications hub attached to the electricity meter, so it relies on a smart electricity meter being installed first.
Can a business have more than one smart meter at the same premises?
Yes, each supply at a premises has its own MPAN or MPRN, and its own meter. A site with several electricity supplies, for example in different parts of a building, can have a separate smart meter for each.
Will solar panels affect a business smart meter?
A smart meter records the electricity a site draws from the grid, so solar panels reduce the consumption it shows whenever they are generating.
Smart meters can also record any electricity exported back to the grid, which is needed for the business to be paid for that exported electricity, though this needs to be set up with the supplier.
Categories: